a squared Sin-Cos encoder output
signal. It also has two Ethernet ports
and MARK inputs. The controller
features distributed axis and I/O
control using HSSI or optional
CANopen channels.
■ ACS Motion Control Inc.
PLYMOUTH, MN
www.acsmotioncontrol.com
thick stainless-steel high-temperature
HEPA recirculating filter. In
addition, the cabinet oven includes
a programming and recording
temperature controller
■ The Grieve Corp.
ROUND LAKE, IL
www.grievecorp.com
injection-molded body measures 0.35
in. wide × 0.50 in. high with lengths
of 1.06 in., 1.56 in., and 2.06 in.,
depending on electrical travel.
■ BEI Duncan Electronics
IRVINE, CA
www.beiduncan.com
Cleanroom Oven
Used for curing medical rubber
products, an electrically heated
500ºF Class 100 cleanroom cabinet
oven has 15-k W heating elements
enclosed in Incoloy-sheathed tubular
Linear Motion Position
Sensors
Small linear motion position sensors
feature a 0.15-in. mounting terminal
and a low profile. The overall height
of the 9600 sensor is 0.50 in.,
enabling installation in applications
with tight packaging constraints.
Offering good precision feedback, the
low-profile potentiometer features a
spring-return shaft that follows the
surface of the measured assembly.
This configuration simplifies the
mechanical interface needs of the
installation. Constructed of high-temperature plastic materials, the
electromechanical device ensures
reliable position feedback in
most applications. The sensor line
complements the company’s product
configurations with longer terminal
lengths of 0.280 in. In addition, it is
Electroluminescent
Inverters
Electroluminescent (EL) inverters
can be used to power EL-backlit
LCDs or devices in which
electroluminescence is used for
accent and decorative lighting.
Compact, lightweight, and completely
solid-state Smart Force dc-ac
EL inverters are used in harsh
and demanding industrial display
environments because of their
shock and vibration resistance.
Vacuum encapsulated for maximum
reliability, they can prolong the
useful life of EL lamps because
they automatically adjust operating
voltage and frequency as the lamp
ages and changes. Standard inverter
designs are available for off-the-shelf
products in various configurations
to address common system and
design requirements. Two series are
available: the JLA series, which
powers EL lamps used to backlight
LCDs from a range of manufacturers,
and the LPS series, which powers
conventional foil EL lamps used in
many backlighting applications.
elements and a 750-cu ft/min, 1-hp
recirculating blower that provides
horizontal airflow across the load.
With workspace dimensions of 36 in.
wide × 36 in. deep × 27 in. high, the
No. 869 oven features 4-in. insulated
walls throughout, an aluminized steel
exterior, a Type 304 2B stainless-steel
interior with continuously welded
seams, an exterior finished with white
epoxy paint, and a #4 brushed-finish
stainless-steel door cover and control
panel face. The oven is equipped with
safety equipment such as explosion-venting door hardware for handling
flammable solvents. It also has a
130-cu ft/min stainless-steel powered
forced exhauster, a 12 × 12 × 6-in.-
thick HEPA fresh air filter with a
2-in. prefilter, and a 24 × 30 × 6-in.-
compatible with industry-standard
terminations for virtual plug-and-play installation. With accurate
performance over a temperature
range of – 40° to 135°C, the units
can withstand shock up to 50 G,
vibrations of 15 G, frequencies from
50 to 10,000 Hz, and humidity levels
up to 95% at 38°C. The sensors’
■ Endicott Research Group Inc.
ENDICOTT, NY
www.ergpower.com
Duckbill Valves
Come Standard
Do you need to:
● Prevent back flow?
● Relief pressure?
● Pump fluid?
● Insert instruments?
Instant valve components
for integrating into your device
Minivalve Interna tional
Yellow Springs, OH
1-937-767-2941
Oldenzaal, Netherlands
+ 31 541 570 620
See us at MD&M Anaheim
home products & tech. about us free samples
www.minivalve.com
Designing Tools for
Precision Extrusion
IISO 9001:2000
Certiifiied
To learn about Guill’s, complete line
of extrusion tooling with numerous
patented technology benefits – call or
visit our website www.Guill.com today.
©2009 Guill Tool & Engineering Co., Inc.
Guill
since 1962
MD&M West
Booth 2472
2/10 - 2/12/09
Anaheim Convention Center
Anaheim, CA
Guill Tool & Engineering Co., Inc.
10 Pike Street • West Warwick, RI 02893
Tel: 401-828-7600 • Fax: 401-823-5310
Email: sales@guill.com
www.Guill.com
